Yamaha TZ250 Remanufactured Parts

We are producing an ever increasing inventory of replacement, replica and performance parts for the Yamaha TZ 250 range of motorcycles, below you will find details of the products we have available. Don’t forget we can also supply all genuine Yamaha parts that are still available.

Through our development partners we’ll keep you on track. Our growing list of products will not only keep your bike looking fantastic but also lower your lap times with the best quality and performance available. We have built many engine and full bike builds using our products, please call us to discuss any requirements you have.

Yamaha Clutch Push 5F7-16357-00

This is a replica of the Yamaha Clutch Push Rod that fits various TZ 250 models.

Yamaha 3AK-18111-00

A replica of the Yamaha gear lever that fits the TZ 250 reverse cylinder models, 1988 to 1990.

Yamaha 4A0-27411-00

A replica of the Yamaha footrest that fits various different TZ models.

£50.00 +vat each

TZ Battery Pack

We supply a replacement modern battery with a new bespoke holder to replace the original battery pack. It fits in the same place on the fairing and comes complete with the fuse holder and block connecter all fitted ready to go. Batteries are avaliable seperatley if required. This fits the TZ 250 models from 1986 to 1989, plus others.

Yamaha TZ 250 Radiator for 3YL and 4DP models

This is a replacement for the Yamaha radiator to fit the 3YL and 4DP models, 1991 to 1995. It is a direct replacement made to the highest standards to improve the cooling when compared to the standard item.

£450.00 +vat

Yamaha TZ 250 Kit Radiator

This radiator fits the 4TW and 5KE models, 1996 onwards. It is a double core curved radiator made to the highest standards to improve the cooling of you motorcycle over that of the standard item. Please specify which model you have when ordering to get the correct temperature sensor output.

£650.00 +vat

Yamaha 3TC-12450-00

Replica of the Yamaha water pump impeller part number 3TC1245000 to fit the 1990 TZ 250 A. Avaliable from stock.

£112.50 +vat

Yamaha 5F7-12450-00

Replica of the Yamaha water pump impeller 5F71245000 to fit various TZ models. Avaliable from stock.

£112.50 +vat

Yamaha 1RK 1133E 00

This is a remanufactured replacement for the Yamaha TZ 250 power valve cable that fits the 1986 to 1990 models, part number 1RK1133E00. They are available from stock.

£14.60 +vat each

Yamaha 3AK 26331 00

Remanufactured replacement for the Yamaha TZ 250 choke cable to fit the 1988 to 1990 models. Yamaha Part number 3AK2633100. Available from stock.

£12.50 +vat each.

Yamaha 3TC 26311 00

Remanufactured replacement for the Yamaha Throttle cable to fit the TZ250 3TC 1990 model. Yamaha part number 3TC2631100. Available from stock.

£15.00 +vat each

Yamaha 3TC 26335 00

Remanufactured replacement for the clutch cable to fit the Yamaha TZ250 3TC 1990 model. Yamaha part number 3TC2633500. Available from stock.

£17.04 +vat

Yamaha 3AK 27211 00

Replica part of the original Yamaha rear brake lever to fit the reverse cylinder TZ250 range, 1988 to 1990. Yamaha part number 3AK2721100.

Waiting for stock

Yamaha 3YL and 4DP Stand Bobbin

This is a replica of the paddock stand bobbin that screws into the swingarm on the TZ 250 3yl and 4dp models.

This item is only sold in pairs.

In Stock

£20.90 +vat

Yamaha TZ 250 3TC 1990 Radiator

This is a replacement for the Yamaha radiator to fit the TZ250A 1990 3TC model . It is a direct replacement made to the highest standards to improve the cooling when compared to the standard item.

£450.00 +vat

Yamaha 4TW 26311 00

Remanufactured replacement for the throttle cable to fit the Yamaha TZ250 4TW model. Yamaha part number 4TW2631100. Available from stock.

£15.80 +vat

Yamaha 4TW 26312 00

Remanufactured replacement for the throttle cable to fit the Yamaha TZ250 4TW model. Yamaha part number 4TW2631200. Available from stock.

£15.80 +vat

Yamaha 3YL 26335 00 & 4TW 26335 00

Remanufactured replacement for the throttle cable to fit the Yamaha TZ250 4TW model. Yamaha part number 3YL2633500 AND 4TW2633500. Available from stock.

£22.00 +vat

Yamaha 3LC-12450-00

Replica of the Yamaha water pump impeller part number 3LC1245000 to fit the 1989 TZ 250 W. Avaliable from stock.

£112.00 +VAT

Yamaha 3AK-27412-00

Replica of the Yamaha footrest hanger, left hand side, part number 3AK2741200 to fit the 1988 and 1989 TZ 250 U/W. Avaliable from stock. This is a CNC product that is then finished to replicate the look of the original cast item as closely as possible.

£84.50 +vat

Yamaha 3AK-27422-00

Replica of the Yamaha footrest hanger, right hand side, part number 3AK2742200 to fit the 1988 and 1989 TZ 250 U/W. Avaliable from stock. This is a CNC product that is then finished to replicate the look of the original cast item as closely as possible.

£109.00 +vat

Yamaha TZ 250 Reverse Cylinder Exhaust Rubbers

This set of four washers can be installed in addition to the rear exhaust rubber mounts on the reverse cyclinder to stop the exhausts twisting and hitting the seat unit when in use. The exhausts remain rubber damped to avoid cracking of the expansion chambers. These are tried and tested on our own machine.

£5.50 +VAT

Yamaha TZ Silencers

We supply high quality Silencers to fit every model of TZ125 and TZ250 machines. These are made to order in the correct specification for each model, some popular models held in stock. This is a handmade in the UK product, larger outer bore to reduce noise is also available.

Prices vary, please contact for pricing.

Yamaha 4DP 24713 00

Replica seat foam, Yamaha part number 4DP 24713 00. This will fit all 4DP and 4TW machines as well as the later 5KE models.

£17.00 +vat

Yamaha TZ 250 Reverse Cylinder Powervalve kit.

As used on our own machines this powervalve kit converts you single powervalve wheel set up to a twin wheel set up. It allows acurate setting up of the powervlave on each cylinder to maintain maximum performance and remove any lag between the two powervalve blades.

£205.00 +vat

Default Image

Yamaha 4DP 26312 00

Remanufactured replacement for the throttle cable to fit the Yamaha TZ250 4DP model. Yamaha part number 4DP2631200. Available from stock. The inner cable length is 658mm, fitted to the 1993 4DP2 machine.

£12.87 +vat

Yamaha 4DP 26311 00

Remanufactured replacement for the throttle cable to fit the Yamaha TZ250 4DP model. Yamaha part number 4DP2631100. Available from stock. The inner cable length is 745mm, fitted to the 1993 4DP2 machine.

£12.87 +vat

Default Image

Yamaha 3YL 1133E 00

Remanufactured replacement for the Powervalve cable to fit the Yamaha TZ250 3YL abd 4DP models. Yamaha part number 3YL1133E00. Available from stock.

£18.18 +vat

Default Image

Yamaha 3YL 1133F 00

Remanufactured replacement for the Powervalve cable to fit the Yamaha TZ250 3YL abd 4DP models. Yamaha part number 3YL1133F00. Available from stock.

£18.08 +vat

Default Image

Yamaha 3YL 1133G 00

Remanufactured replacement for the Powervalve cable to fit the Yamaha TZ250 3YL abd 4DP models. Yamaha part number 3YL1133G00. Available from stock.

£15.21 +vat

Default Image

Yamaha 3YL 1133H 00

Remanufactured replacement for the Powervalve cable to fit the Yamaha TZ250 3YL abd 4DP models. Yamaha part number 3YL1133H00. Available from stock.

£15.21 +vat

Default Image

Yamaha 3TC-27422-00

Replica of the Yamaha footrest hanger, left hand side, part number 3TC2742200 to fit the 1990 TZ 250 A. Avaliable from stock. This is a CNC product that is then finished to replicate the look of the original cast item as closely as possible.

£89.50 +vat

Default Image

Yamaha 3TC-27412-00

Replica of the Yamaha footrest hanger, right hand side, part number 3TC2741200 to fit the 1990 TZ 250 A. Avaliable from stock. This is a CNC product that is then finished to replicate the look of the original cast item as closely as possible.

£96.00 +vat